Projects

BACK TO OVERVIEW

ASAM Test Specification Study Project

PROJECT NUMBER
S_2020_13
PROJECT TYPE
Study project
DOMAIN
Simulation
KICK-OFF MEETING
ENROLL BY
Nov 30, 2020
PROJECT START
Dec 2020
WEBINAR / WORKSHOP
PUBLIC REVIEW
Oct 2021
PROJECT END
Nov 2021


Webinar

 

On Jun 23, 2021, ASAM hosted a webinar to give an interim report of the project and to allow the community to give feedback on the direction the group is heading. The recordings are now online.

 

Review

 

 

Contact

In 2018 ASAM adopted the so-called OpenX standards (ASAM OpenCRG, ASAM OpenDRIVE and ASAM OpenSCENARIO). Since then, these standards have been continuously further developed. In addition, areas were identified that require standards for a simple and consistent workflow. For this purpose, the standards ASAM OpenLABEL (metadata), ASAM OSI (interface), ASAM OpenODD (operational design domain) and ASAM OpenXOntolgy (a common ontology for all ASAM OpenX standards) have been initiated so far. 

 

 

Scenario Based Testing Workflow

 

While this means that many pieces of the puzzle when it comes to standardized scenario-based testing workflows are being tackled across ASAM, the overall interplay between those pieces, as well as the classical testing and test automation standards (like OTXXIL/XIL-MA) are left somewhat undefined.

 

This study project shall examine the relevant test techniques and use cases for testing and homologation of the ADAS/AD domain. Our goal is to identify relevant standards, potential workflows and their variants, and the overall interplay between these parts to form a cohesive whole. ​This analysis will lead to a documented set of overall use cases for testing and homologation, a set of potential workflows implementing these, together with an overview of relevant users, standards and their application. ​


Additionally, the project shall identify gaps in the workflows, leading to the identification of potentially needed additions to existing standards, liaisons between standards, or completely new standards. ​Recommendations for these standards or additions shall be collected and documented. The goal is to define a valid basis for follow-up activities and projects
 

Key Aspects of the project:

  • Overview of test methods in the field of ADAS/AD
  • Test strategy blueprint
  • Detailed use cases for the implementation of a test strategy
  • Alignment with current standardizations
  • Development of proposals for further standardization

 



Participating Companies

  • dSPACE GmbH
  • AKKA GmbH & Co. KGaA
  • AstaZero AB
  • BMW AG
  • BTC Embedded Systems AG
  • Deepen AI
  • Driving Simulation Association
  • emotive GmbH & Co. KG
  • FEV Software and Testing Solutions GmbH
  • Foretellix Ltd.
  • imbus AG
  • MicroNova AG
  • Mindmotiv GmbH
  • Opel Automobile GmbH
  • Peak Solution GmbH
  • PikeTec GmbH
  • RA Consulting GmbH
  • Technische Hochschule Köln
  • TraceTronic GmbH
  • TÜV SÜD AG
  • Vector Informatik GmbH
  • WMG University of Warwick
  • Arriver GmbH
  • TNO

BACK TO OVERVIEW



Webinar

 

On Jun 23, 2021, ASAM hosted a webinar to give an interim report of the project and to allow the community to give feedback on the direction the group is heading. The recordings are now online.

 

Review

 

 

Contact

Our newsletter informs you about current activities.
Subscribe