Members Profile

Members
ETAS

ETAS GmbH

Tool Vendor / Service Provider

ETAS’ comprehensive portfolio includes vehicle basic software, middleware, development tools, cloud-based operations services, cybersecurity solutions, and end-to-end engineering and consulting services for the realization of software-defined vehicles. Our product solutions and services enable vehicle manufacturers and suppliers to develop, operate, and secure differentiating vehicle software with increased efficiency.

ASAM related products

ETAS ASCET

Type

Function Development and Software Engineering Tool

Functionalities

ETAS ASCET – Model-based ECU Software Development: The ASCET product family provides an integrated solution for model-based development of application software for embedded systems. ASCET is widely used for modeling, simulation, rapid prototyping, and ISO 26262/IEC 61508 SIL3 certified automatic code generation for a variety of HW platforms. ASCET supports automotive standards such as ASAM, AUTOSAR, MISRA-C:2004, and OSEK.

Supported ASAM Standards

ASAM MCD-2 MC , ASAM MDX

ETAS ASCMO

Type

Measurement, Calibration, and Diagnostics Tool

Functionalities

ETAS ASCMO – Accurate Prediction of Complex System Behavior: ETAS ASCMO facilitates the optimization and calibration of complex systems in virtual environments on the PC. The use of ETAS ASCMO significantly reduces the effort required for testing on real-world systems, e.g., at the test bench or in the vehicle. ETAS ASCMO uses a data-based model of high accuracy to describe system behavior. The model is based on a minimal number of measurements taken on the actual system.

Supported ASAM Standards

ASAM CDF , ASAM MDF

ETAS EHANDBOOK

Type

Measurement, Calibration, and Diagnostics Tool

Functionalities

ETAS EHANDBOOK – Interactive ECU Documentation: ETAS EHANDBOOK is an interactive documentation solution for efficient ECU calibration. It offers a large variety of views and chained links for improved ease of navigation through extensive ECU documentation. ASCET and Simulink® are translated into new interactive models to understand the ECU functions and their dependencies in an easy way. This allows calculation and highlighting of signal flows across model hierarchy boundaries, too. ETAS EHANDBOOK links to ETAS INCA to facilitate the live display of values from INCA experiments and to create INCA experiments more quickly. The entire contents (texts, structures, graphics, models) of the ECU documentation is stored in a so-called EHANDBOOK Container. The generation of it based on input data in standard ASAM formats.

Supported ASAM Standards

ASAM CC , ASAM CDF , ASAM FSX , ASAM MCD-2 D , ASAM MCD-2 MC , ASAM MDX

ETAS EHOOKS

Type

Function Development, Software Engineering, Measurement, ECU Calibration, and Diagnostics Tool

Functionalities

ETAS EHOOKS − Bypass Hook Insertion Tool: ETAS EHOOKS is a software tool that facilitates the efficient insertion of bypass hooks into ECU software. The EHOOKS user can place bypass hooks directly into the HEX & A2L files without knowledge of software details – there is no need for access to either ECU source code or ECU software build environment. EHOOKS ECU ports are developed with the support and involvement of the Tier 1 ECU software development team. This allows EHOOKS to do a very high quality job of placing the hooks into the ECU software, but also makes EHOOKS very simple to use.

Supported ASAM Standards

ASAM MBFS , ASAM MCD-2 MC

ETAS INCA

Type

Measurement, Calibration, and Diagnostics Tool

Functionalities

ETAS INCA – Integrated Environment for Measurement, ECU Calibration, and Diagnostics: INCA is a universal product family for online and offline calibration of ECU function parameters, controlled via a graphical user interface or remote access. INCA performs the measurement of signals obtained from ECUs and from the vehicle environment, and incorporates powerful tools for managing ECU projects and parameters, analyzing measured and reading diagnostic data, as well as flash programming.

Supported ASAM Standards

ASAM ASAP 3 , ASAM CDF , ASAM iLinkRT , ASAM MCD-1 CCP , ASAM MCD-1 XCP , ASAM MCD-2 D , ASAM MCD-2 MC , ASAM MCD-2 NET , ASAM MCD-3 MC , ASAM MDF

ETAS INCA-FLOW

Type

Measurement, Calibration, and Diagnostics Tool

Functionalities

ETAS INCA-FLOW – Guided and Automated Calibration: INCA-FLOW provides a graphical development environment enabling calibration engineers to specify automation sequences for INCA without the need for programming. To ensure results of consistent quality, INCA-FLOW is fully integrated with INCA and supports best-practice processes for calibration, validation, and measurement.

Supported ASAM Standards

ASAM ASAP 3 , ASAM CDF , ASAM iLinkRT , ASAM MCD-1 XCP , ASAM MCD-2 MC , ASAM MDF

ETAS INTECRIO

Type

Function Development Tool

Functionalities

ETAS INTECRIO – Integrated Prototyping Environment: INTECRIO Integrated Prototyping Environment is an integration and configuration platform for prototyping of function models from ASCET-MD and MATLAB®/Simulink®, as well as AUTOSAR and plain C code. ECU function models can be executed and validated in-vehicle by means of rapid prototyping hardware, using a vast range of hardware and ECU bypass interfaces – or at the developer’s desk on the PC in non-realtime.

Supported ASAM Standards

ASAM MCD-2 MC , ASAM MCD-2 NET

ETAS INTECRIO-RLINK

Type

Function Development Tool

Functionalities

ETAS INTECRIO-RLINK – Prototyping Blockset: With INTECRIO-RLINK prototyping block set for Simulink®, function developers can develop, configure, and generate function prototypes directly in Simulink®. They can then be executed and validated in-vehicle by means of rapid prototyping hardware, using a vast range of hardware and ECU bypass interfaces – or at the developer’s desk on the PC in non-realtime.

Supported ASAM Standards

ASAM MCD-2 MC , ASAM MCD-2 NET

ETAS ISOLAR-A

Type

Design Tool for Classic AUTOSAR

Functionalities

ETAS ISOLAR-A – AUTOSAR Authoring: ISOLAR-A is the ETAS System and Application Software design tool. ISOLAR-A employs many standards to support interoperability with third-party products, and with the ETAS RTA-CAR solution for the Classic AUTOSAR standard, comprising the BSW configuration tool ISOLAR-B, the RTE generator RTA-RTE, the OS generator RTA-OS, the BSW generator RTA-BSW, the Flash-Boot-Loader RTA-FBL, and more. ISOLAR-A also complements the Adaptive AUTOSAR solution of ETAS, comprising the configuration tool ISOLAR-A_ADAPTIVE, the RTA-VRTE platform software, and more.

Supported ASAM Standards

ASAM MCD-2 D , ASAM MCD-2 NET

ETAS XETK/ETK

Type

ECU Interface

Functionalities

ETAS XETK/ETK – Universal ECU Interfaces: The plug-on devices (POD) XETKs/ETKs comprise parallel or serial Electronic Control Unit (ECU) interfaces for calibrating, flashing, measuring, rapid prototyping (bypass), and debugging. XETKs/ETKs are designed to support function development for, and calibration of, automotive ECUs in harsh environments (operating temperature ranges from -40 °C to +110 °C), XETKs/ETKs provide excellent power-on (cold start) features, proven reliability, high performance, low latency, and high data throughput. XETKs support the ASAM XCP standard.

Supported ASAM Standards

ASAM MCD-1 XCP , ASAM MCD-2 MC

ETAS VECU-BUILDER

Type

Software Engineering Tool

Functionalities

ETAS VECU-BUILDER – tool for vECU generation: VECU-BUILDER is a tool to generate stand-alone runnable virtual ECUs for verification and validation of automotive microcontroller software in Software-in-the-Loop (SiL) setups. Input sources may be AUTOSAR-compliant source codes, non-AUTOSAR-compliant source code and even PC binaries.

Supported ASAM Standards

ASAM MCD-1 XCP , ASAM MCD-2 MC

Keywords

automotive embedded control, bus monitoring, calibration, data acquisition (DAQ), data analysis, development processes, diagnostics, Electronic Control Unit, embedded security, embedded software, embedded systems, engineering, HiL, measurement, rapid prototyping, software development tool, test automation, code generation