Members Profile

dSPACE GmbH

dSPACE stands for complete development systems for electronic controls in automotives, aerospace and mechatronics. dSPACE systems are used in R&D applications in industry and universities where fast time-to-market and solid results are key requirements. Typical applications are system and software architecture design, rapid control prototyping, automatic production code generation, hardware-in-the-loop simulation and calibration.

ASAM related products

Bus Manager
Type
Central tool for configuring the bus signals for various simulation platforms
Functionalities
The dSPACE Bus Manager is a powerful tool for configuring bus communication for simulation purposes, e.g., restbus simulation, and for implementing the bus communication in real-time applications for dSPACE SCALEXIO systems.
Supported ASAM Standards
ASAM MCD-2 NET
Failure Simulation Package
Type
Interface to dSPACE Failure Insertion Units
Functionalities
The Failure Simulation Package gives you quick and easy access to ASAM XIL-compliant failure simulation units. It provides API access according to the ASAM XIL API Electrical Error Simulation Port (EESPort) and uniform access to all dSPACE failure simulation systems. If you use dSPACE ControlDesk, the Failure Simulation Package offers an ASAM XIL API EESPort-compliant graphical user interface component that is available when the Failure Simulation Package is installed.
Supported ASAM Standards
ASAM XIL
RTI CAN MultiMessage Blockset
Type
Tool for combining dSPACE systems with CAN communication networks
Functionalities
The RTI CAN MultiMessage Blockset is an extension for Real-Time Interface and can be used for combining dSPACE systems with CAN communication networks and for configuring these CAN networks.
Supported ASAM Standards
ASAM MCD-2 D
RTI LIN MultiMessage Blockset
Type
Tool for combining dSPACE systems with LIN communication networks
Functionalities
The RTI LIN MultiMessage Blockset is an extension for Real-Time Interface and can be used for combining dSPACE systems with LIN communication networks and for configuring these LIN networks.
Supported ASAM Standards
ASAM MCD-2 NET
AutomationDesk
Type
Automated testing for hardware-in-the-loop (HIL) simulation
Functionalities
AutomationDesk is a powerful front-end tool for automated testing of the application software or diagnostic functions of electronic control units (ECUs).
Supported ASAM Standards
ASAM MCD-3 D , ASAM MCD-3 MC , ASAM MDF , ASAM XIL
ControlDesk
Type
Experiment and instrumentation software for ECU development
Functionalities
The software includes functionalities for layouting experiments, instrumentation, measurement, post-processing, ECU calibration, as well as diagnostics access. It offers synchronized data capture across ECUs, RCP and HIL platforms, and bus systems, and has an integrated project and experiment management.
Supported ASAM Standards
ASAM CDF , ASAM MCD-1 CCP , ASAM MCD-1 XCP , ASAM MCD-2 D , ASAM MCD-2 MC , ASAM MCD-2 NET , ASAM MCD-3 D , ASAM MCD-3 MC , ASAM MDF , ASAM XIL , ASAM XIL-MA
dSPACE ECU Flash Programming Tool
Type
ECU flash programming
Functionalities
Software for programming the ECU flash memory via XCP on CAN, XCP on Ethernet, various types of on-chip debug ports like JTAG/NEXUS, NBD/AUD, JTAG/OCDS, DAP and JTAG/ SDI and the dSPACE Generic Serial Interfaces GSI1 and GSI2.
Supported ASAM Standards
ASAM MCD-1 XCP
dSPACE Ethernet Configuration Package
Type
Hardware-in-the-loop (HIL) simulation
Functionalities
Convenient software tool for configuring a dSPACE system as a simulation node in a Ethernet network. It relies on network data available in a FIBEX or AUTOSAR representation and is dedicated to configure SOME/IP based simulations.
Supported ASAM Standards
ASAM MCD-2 NET
dSPACE FlexRay Configuration Package
Type
Hardware-in-the-loop (HIL) simulation and rapid control prototyping
Functionalities
Convenient software tool for configuring a dSPACE system as a simulation node in a FlexRay network. It relies on network and scheduling data available in a FIBEX or AUTOSAR representation.
Supported ASAM Standards
ASAM MCD-2 NET
dSPACE XCP Service
Type
XCP service to be implemented on the ECU
Functionalities
ECU service code for XCP on CAN and Ethernet (TCP/IP, UDP/IP) supporting measurement, calibration, bypassing and ECU flash programming.
Supported ASAM Standards
ASAM MCD-1 XCP
Platform API Package
Type
Package of application programming interfaces (API) for accessing simulation platforms
Functionalities
Program interfaces in .NET and Python for reading, writing, stimulating and capturing model variables on dSPACE real-time platforms.
Supported ASAM Standards
ASAM MDF , ASAM XIL , ASAM XIL-MA
RTI Bypass Blockset
Type
Rapid control prototyping (primarily bypassing) and hardware-in-the-loop (HIL) simulation
Functionalities
Simulink® blockset providing ECU read and write access from dSPACE real-time platforms via different kinds of ECU interfaces such as CCP, XCP, DPMEM PODs or on-chip debug ports. The blockset is especially designed for the dialog-based configuration of bypass applications. It allows ASAM MCD-2 MC (ASAP2) files to be imported and ECU variables to be selected via a convenient browser. It handles conversion formulas and the selection of bypass hooks automatically. In addition, the RTI Bypass Blockset supports on-target (internal) bypassing, allowing the bypass model to be compiled and downloaded directly into the free flash memory and RAM of the target ECU. For this, model parameters and signals are automatically added to the ECU’s ASAM MCD-2 MC (ASAP2) file.
Supported ASAM Standards
ASAM MCD-1 CCP , ASAM MCD-1 XCP , ASAM MCD-2 MC
SystemDesk
Type
System and software architecture development
Functionalities
SystemDesk supports the development of software architectures and distributed automotive electrics/electronics (E/E) systems. Such systems can be modeled according to the AUTOSAR standard. Existing communication matrix files can be imported in SystemDesk to specify network communication. When AUTOSAR software components are modeled or imported in SystemDesk, available ASAM MCD-2 MC (ASAP2) models can be imported as well. During generation of the AUTOSAR run-time environment (RTE) and virtual ECUs (V-ECUs), ASAP2 file generation is also performed for variables that are tagged for calibration and measurement according to the AUTOSAR concept. When V-ECUs are built, instances of the XCP service (XCP on Ethernet – TCP/IP) are implemented in the V-ECU code. Thus, the V-ECUs and variables described in the ASAM MCD-2 MC (ASAP2) files can be accessed during simulation.
Supported ASAM Standards
ASAM MCD-1 XCP , ASAM MCD-2 MC , ASAM MCD-2 NET
TargetLink
Type
Production code generation (for ECU development)
Functionalities
TargetLink is a software system that generates production code (C code) straight from the MathWorks® Simulink®/Stateflow® graphical development environment. The C code generation options range from plain ANSI C code to optimized fixed- or floating-point code for AUTOSAR platforms. Versatile code configuration options ensure that the production code copes with processor constraints. Converting graphical models directly into production code ensures perfect consistency between model and code at all times. Since the same model will always result in the same proven code, TargetLink’s code generation is deterministic and thus guarantees the highest software quality. Every step can be tested against the specification via the built-in simulation features.
Supported ASAM Standards
ASAM MCD-1 CCP , ASAM MCD-1 XCP , ASAM MCD-2 MC
Variable Editor
Type
Variable description file editor
Functionalities
Convenient tool for visualizing, editing and creating ECU description files according to the AE MCD-2MC standard.
Supported ASAM Standards
ASAM MCD-2 MC
VEOS
Type
PC-based simulation platform for ECU development
Functionalities
VEOS is a PC-based simulation platform for virtual validation in the development of electronic control units (ECUs) and systems. VEOS is used in the early development stages to simulate a wide range of models − function models, virtual ECUs, bus systems, and vehicle models – independently of the simulation hardware.
Supported ASAM Standards
ASAM MCD-1 XCP , ASAM MCD-2 MC , ASAM XIL-MA

Keywords

calibration,diagnostics,ECU,hardware-in-the-loop,production code generation,rapid control prototyping,test automation,vehicle communication, bus monitoring, data acquisition(DAQ),CAN,LIN,FlexRay, software development tool

CONTACT INFORMATION
Address
Rathenaustr. 26
33102 Paderborn
Germany
Phone
+ 49 5251 1638 0
Fax
+ 49 5251 16198 0
Website