Members Profile

Safety software platform for automated driving and beyond

MotionWise is a series-proven safety software platform for automated driving. It acts as the safety mastermind for automated driving within a vehicle architecture, handling the high complexity of such systems. Each application hosted by MotionWise will run encapsulated from its peers, resulting in a safe environment where applications with different safety and real-time requirements can coexist and interact. With its smart architecture design and surrounding tools, MotionWise helps unleashing the full potential of automated driving solutions, while offering many technological and commercial benefits, much like real-time capabilities with fail-operational performance, safety by design, guarantee of service, cutting edge open integration platform and many more. https://www.tttech-auto.com/products/safety-software-platform/motionwise/

The all-in-one data logger for the entire vehicle networking

The PM-200 sets the bar considerably higher on the topic of safeguarding and troubleshooting vehicles. Bus systems such as CAN, CAN-FD, FlexRay™, LIN, MOST150 and Automotive Ethernet are logged at a data speed up of to 120 MB/s. SSD removable media allow for quick evaluation and distribution of the data. Various upgrade options enable configuration for any application. Flexibility, programmability and support from debugging protocols make it possible to meet the high demands of functionality and fleet tests as well as of test runs. Diagnostic Log and Trace protocol specified by AUTOSAR 4.0 PM-200 is now offering a software option of collecting and analyzing debug messages and valuable information from infotainment ECUs via Diagnostic Log and Trace (DLT) protocol. This standardized logging and tracing software component, based on the AUTOSAR 4.0 standard, helps to consolidate the existing variety of logging and tracing protocols on one format. This option can also be easily unlocked for existing data loggers by a simple software and license upgrade.

ASAM MCD-1 CCP , ASAM MCD-1 XCP , ASAM MDF

1000BASE-T1 Ethernet logging expansion with low latency

The PT-20MG expands the PM-200 data logger from the Power Family by adding six 1000BASE-T1 automotive gigabit Ethernet interfaces. Ethernet traffic is looped through the device with constantly low latency irrespective of the frame length. This means that the time synchronization protocols of the logged Ethernet interfaces are not affected. 1000BASE-T1 packets are time-stamped, filtered and sent to the data logger via a 1000BASE-T interface.

ASAM MCD-1 CCP , ASAM MCD-1 XCP , ASAM MDF

100base-T1 Ethernet (BroadR-Reach®) logging expansion with low latency

The PT-15B expands the PM-200 data logger from the Power Family by adding twelve 100base-T1 interfaces. Ethernet traffic is looped through the device with constantly low latency irrespective of the frame length. This means that the time synchronization protocols of the logged Ethernet interfaces are not affected. 100base-T1 packets are time stamped, filtered and sent to the PM-200 data logger via a 1000base-T interface.

ASAM MCD-1 CCP , ASAM MCD-1 XCP , ASAM MDF