Projects

Main Goal of the Project

The new version ASAM iLinkRT V3.0.0 was released in November. Due to the large number of new, supported capabilities and the fact that this protocol is positioned as the successor of Arbeitskreis zur Standardisierung von Applikationssystemen (Eng.: Working Group for the Standardization of Calibration Systems)ASAP 3, it is expected to be widely used in the market. Any problems, difficulties in understanding and possible ambiguities that may arise shall be solved within this maintenance project. 

Rudimentary cross tests with demo clients and demo servers to test basic functionalities were already carried out as part of the A public specification, which has been developed by experts in a defined consensus-driven development process and was released by officials that represent a significant share of the industry for which it is targeted, giving the specification the necessary legitimacy to be called a 'Standard'.standard development project. In this maintenance project, cross tests shall be carried out with real products from participating companies.

About ASAM iLinkRT V3.0.0

ASAM iLinkRT is a high-speed automation access protocol for Measurement and CalibrationMC-Servers. With iLinkRT V3.0.0 a powerful communication protocol is entering the market that is independent of Arbeitskreis zur Standardisierung von Applikationssystemen (Eng.: Working Group for the Standardization of Calibration Systems)ASAP 3 and does not only enable data acquisition and adjustment but also complete configuration and parameterization. It can be used in multi-client as well as in multi-server architectures. Particularly with the use of multi-client applications (Test Automation, Automatic The process of ECU parameter tuning. Tests with ECU hardware and software in the loop are carried out. ECU internal variables and external sensor data is recorded and analyzed. The values of internal ECU parameters are determined as a result of this process.Calibration Systems, Monitor Systems) the new version is able to avoid previous disadvantages in communication with The process of recording data from internal ECU memory and external sensors.measurement and The process of ECU parameter tuning. Tests with ECU hardware and software in the loop are carried out. ECU internal variables and external sensor data is recorded and analyzed. The values of internal ECU parameters are determined as a result of this process.calibration systems, such as the need for multi-client adapters. In addition, the recorder concept was revised, and the standardized support of project-specific preselected devices, measurements and characteristics was added. Further features of ASAM iLinkRT are its ability to carry out The process of ECU parameter tuning. Tests with ECU hardware and software in the loop are carried out. ECU internal variables and external sensor data is recorded and analyzed. The values of internal ECU parameters are determined as a result of this process.calibration in parallel to the measuring as well as the efficient transmission of measured values per event.