ETAS GmbH

Tool Supplier

Brief Description

ETAS provides innovative solutions for the development of embedded systems for the automotive industry and other sectors of the embedded industry. As a systems provider, ETAS supplies a multifaceted portfolio that covers the range from integrated tools and tool solutions to engineering services, consulting, training, and support. Security solutions in the area of embedded systems are offered by the ETAS subsidiary ESCRYPT. Established in 1994, ETAS GmbH is a 100-percent subsidiary of the Bosch Group, with international locations in 14 countries in Europe, North and South America, and Asia.

ASAM related products and services

  • ETAS ASCET

    Top
  • Function Development and Software Engineering Tool

  • ETAS ASCET – Model-based ECU Software Development: The ASCET product family provides an integrated solution for model-based development of application software for embedded systems. ASCET is widely used for modeling, simulation, rapid prototyping, and ISO 26262/IEC 61508 SIL3 certified automatic code generation for a variety of HW platforms. ASCET supports automotive standards such as ASAM, AUTOSAR, MISRA-C:2004, and OSEK.

  • ASAM AE MBFS, ASAM AE MCD-2 MC (ASAP2/A2L)

  • ETAS ASCMO

    Top
  • Measurement, Calibration, and Diagnostics Tool

  • ETAS ASCMO – Accurate Prediction of Complex System Behavior: ETAS ASCMO facilitates the optimization and calibration of complex systems in virtual environments on the PC. The use of ETAS ASCMO significantly reduces the effort required for testing on real-world systems, e.g., at the test bench or in the vehicle. ETAS ASCMO uses a data-based model of high accuracy to describe system behavior. The model is based on a minimal number of measurements taken on the actual system.

  • ASAM COMMON MDF

  • ETAS EHANDBOOK

    Top
  • Measurement, Calibration, and Diagnostics Tool

  • ETAS EHANDBOOK – Interactive ECU Documentation: ETAS EHANDBOOK is an interactive documentation solution for efficient ECU calibration. It offers a large variety of views and chained links for improved ease of navigation through extensive ECU documentation. ASCET and Simulink® are translated into new interactive models to understand the ECU functions and their dependencies in an easy way. This allows calculation and highlighting of signal flows across model hierarchy boundaries, too. ETAS EHANDBOOK links to ETAS INCA to facilitate the live display of values from INCA experiments and to create INCA experiments more quickly. The entire contents (texts, structures, graphics, models) of the ECU documentation is stored in a so-called EHANDBOOK Container. The generation of it based on input data in standard ASAM formats.

  • ASAM AE CC, ASAM AE FSX, ASAM AE MDX

  • ETAS EHOOKS

    Top
  • Function Development, Software Engineering, Measurement, ECU Calibration, and Diagnostics Tool

  • ETAS EHOOKS − Bypass Hook Insertion Tool: ETAS EHOOKS is a software tool that facilitates the efficient insertion of bypass hooks into ECU software. The EHOOKS user can place bypass hooks directly into the HEX & A2L files without knowledge of software details – there is no need for access to either ECU source code or ECU software build environment. EHOOKS ECU ports are developed with the support and involvement of the Tier 1 ECU software development team. This allows EHOOKS to do a very high quality job of placing the hooks into the ECU software, but also makes EHOOKS very simple to use.

  • ASAM AE MBFS, ASAM AE MCD-2 MC (ASAP2/A2L)

  • ETAS INCA

    Top
  • Measurement, Calibration, and Diagnostics Tool

  • ETAS INCA – Integrated Environment for Measurement, ECU Calibration, and Diagnostics: INCA is a universal product family for online and offline calibration of ECU function parameters, controlled via a graphical user interface or remote access. INCA performs the measurement of signals obtained from ECUs and from the vehicle environment, and incorporates powerful tools for managing ECU projects and parameters, analyzing measured and reading diagnostic data, as well as flash programming.

  • ASAM AE CDF, ASAM AE MCD-1 CCP, ASAM AE MCD-1 XCP, ASAM AE MCD-2 D (ODX), ASAM AE MCD-2 MC (ASAP2/A2L), ASAM AE MCD-2 NET (FIBEX), ASAM AE MCD-3 MC, ASAM COMMON MDF

  • ETAS INCA-FLOW

    Top
  • Measurement, Calibration, and Diagnostics Tool

  • ETAS INCA-FLOW – Guided and Automated Calibration: INCA-FLOW provides a graphical development environment enabling calibration engineers to specify automation sequences for INCA without the need for programming. To ensure results of consistent quality, INCA-FLOW is fully integrated with INCA and supports best-practice processes for calibration, validation, and measurement.

  • ASAM AE MCD-2 MC (ASAP2/A2L), ASAM COMMON MDF

  • ETAS INCA-VLINK

    Top
  • Measurement, Calibration, and Diagnostics Tool

  • ETAS INCA-VLINK – Blockset for Measurement and Calibration on Windows: The ETAS INCA-VLINK Blockset for Measurement and Calibration on Windows allows the calibration and validation of Simulink® models running as executable programs on standard Windows PCs. The Blockset provides a build environment for generating virtual prototypes from Simulink® models with one click. Recorded measurement data can serve as function stimuli. After the generation, executable prototypes can be easily distributed and calibrated with INCA.

  • ASAM AE MCD-1 XCP, ASAM AE MCD-2 MC (ASAP2/A2L), ASAM COMMON MDF

  • ETAS INTECRIO

    Top
  • Function Development Tool

  • ETAS INTECRIO – Integrated Prototyping Environment: INTECRIO Integrated Prototyping Environment supports the development of embedded control software through integrated functions modeled in the engineers familiar ASCET-MD, MATLAB®/Simulink®, AUTOSAR, and/or C code development environment. INTECRIO provides a common environment for prototyping control functions on the PC or in the real world by means of rapid prototyping hardware.

  • ASAM AE MCD-2 MC (ASAP2/A2L), ASAM AE MCD-2 NET (FIBEX)

  • ETAS INTECRIO-RLINK

    Top
  • Function Development Tool

  • ETAS INTECRIO-RLINK – Prototyping Blockset: With INTECRIO-RLINK, function developers can perform all steps of prototype configuration and generation directly in Simulink®. The Prototyping Blockset supports configuration tasks for the various ETAS prototyping targets and their connectivity with ECU bypass plus sensor and actuator signals. In addition, the Windows PC is supported for non-realtime prototyping.

  • ASAM AE MCD-2 MC (ASAP2/A2L), ASAM AE MCD-2 NET (FIBEX)

  • ETAS ISOLAR-A

    Top
  • Software Engineering Tool

  • ETAS ISOLAR-A – AUTOSAR Authoring: ISOLAR-A is an AUTOSAR authoring tool. It is built on Eclipse technology and uses the Artop framework to enable easy integration into existing development environments. ISOLAR-A can be integrated with other AUTOSAR-compliant tools from ETAS or third-party vendors.

  • ASAM AE MCD-2 NET (FIBEX)

  • ETAS ISOLAR-EVE

    Top
  • Software Engineering Tool

  • ETAS ISOLAR-EVE – AUTOSAR Software Validation: ISOLAR-EVE is an Eclipse-based environment for the configuration of virtual ECUs. ISOLAR-EVE is closely integrated with the ETAS ISOLAR-A AUTOSAR authoring tool and the application software behavior modeling/auto-coding tool ETAS ASCET. ISOLAR-EVE is open to other AUTOSAR-compliant authoring and behavior-modeling tools as well as to manually coded AUTOSAR application software components.

  • ASAM AE MCD-1 XCP, ASAM AE MCD-2 MC (ASAP2/A2L)

  • ETAS LABCAR-AUTOMATION

    Top
  • Test and Validation Tool

  • ETAS LABCAR-AUTOMATION – Automated ECUTesting: Develops, manages, and executes abstract and test bench-independent automated tests for embedded software. To ensure high-quality automated tests, the tool supports different activities and roles in the testing process.

  • ASAM AE MCD-2 D (ODX), ASAM AE MCD-2 MC (ASAP2/A2L), ASAM AE XIL

  • ETAS LABCAR-OPERATOR

    Top
  • Test and Validation Tool

  • ETAS LABCAR-OPERATOR – ECU Test Configuration and Operation: Configures and operates Hardware-in-the-Loop testing systems for the validation and verification of automotive embedded software. LABCAR-OPERATOR provides virtual instrumentation, data and signal flow management, signal generation, and real-time data logging.

  • ASAM AE MCD-2 MC (ASAP2/A2L), ASAM AE XIL

  • ETAS XETK/ETK

    Top
  • ECU Interface

  • ETAS XETK/ETK – Universal ECU Interfaces: XETKs/ETKs comprise parallel or serial Electronic Control Unit (ECU) interfaces for calibrating, flashing, measuring, rapid prototyping (bypass), and debugging. XETKs/ETKs are designed to support function development for, and calibration of, automotive ECUs in harsh environments (operating temperature ranges from -40 °C to +110 °C), XETKs/ETKs provide excellent power-on (cold start) features, proven reliability, high performance, low latency, and high data throughput. XETKs support the ASAM XCP standard.

  • ASAM AE MCD-2 MC (ASAP2/A2L)

  • Keywords

    automotive embedded control, bus monitoring, calibration, data acquisition (DAQ), data analysis, development processes, diagnostics, Electronic Control Unit, embedded security, embedded software, embedded systems, engineering, HiL, measurement, rapid prototyping, software development tool, test automation, code generation
Back to top
 
  • Contact Information

  • Borsigstr. 14
    70469 Stuttgart
    Germany
  • + 711 3423-2240
  • + 711 3423-2106

  • Ms. Anja Krahl


  • anja.krahl@etas.com


  • www.etas.com